Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!aplcen!uunet!wa3wbu!compnect!johncore From: johncore@compnect.UUCP (John Core ) Newsgroups: comp.unix.sysv386 Subject: Re: Any success using a Perstor ARLL controller with Microport SysV/386? Summary: rll on uport Message-ID: <768@compnect.UUCP> Date: 8 Sep 90 12:07:00 GMT References: <1990Sep5.210826.14041@athena.mit.edu> Organization: John Core at home, Harrisburg,PA Lines: 29 In article <1990Sep5.210826.14041@athena.mit.edu>, di@hstbme.mit.edu (David Israel) writes: > A friend of mine recently bought a Perstor ARLL controller that he > would like to use with Microport SysV/386 v3.0e. However, he found that > he could not get through the install procedure (he has no trouble > installing with an MFM controller), even though the hardware works > fine under DOS and Microport supports RLL controllers by allowing a > user-selectable number of sectors per track. Has anybody > managed to install Microport System V/386 on a machine with this > controller? If so, could you provide details? Failing that, does > anybody know whether this controller is usable with any of the other > 386 Sys V versions? Thanks. > > David Israel (di@hstbme.mit.edu) a few questions. What did he use to low-level the drive, how did the install fail? Some controllers forget about the existance of any other os other than MS-DOS and mark the ENTIRE track bad when they find a bad sector. This will add 26 entries (26 sectors/track) into /etc/partitions on the uport install quickly blowing the 64 entry limit. Wizard Systems | UUCP: uunet!wa3wbu!compnect!johncore P.O. Box 6269 |INTERNET: johncore@compnect.wa3wbu Harrisburg, Pa. 17112-6269 |a public bbs since 1978. Data(717)657-4992 & 4997 John Core, SYSOP |------------------------------------------------- ----------------------------| No matter where you go, there you are! a woman is just a woman, but a good cigar is a smoke. -R. Kipling