Xref: utzoo comp.sys.dec:4001 comp.unix.ultrix:4518
Path: utzoo!attcan!uunet!samsung!rex!wuarchive!julius.cs.uiuc.edu!apple!voder!pyramid!prls!mips!bridge2!jarthur!usc!ucsd!swrinde!zaphod.mps.ohio-state.edu!rpi!uupsi!sunic!news.funet.fi!ujocs!news
From: vaisanen@joyds2.joensuu.fi (Jarmo Vaisanen)
Newsgroups: comp.sys.dec,comp.unix.ultrix
Subject: Re: VMS/ULTRIX CONNECT
Message-ID: <1990Sep11.135908.3771@ujocs.joenseu.fi>
Date: 11 Sep 90 13:59:08 GMT
References: <3903.26ebda46@wums2.wustl.edu> <1990Sep5.202710.5544@ux1.cso.uiuc.edu> <1990Sep6.141311.28189@ujocs.joensuu.fi>
Sender: news@ujocs.joensuu.fi (News-uutiset)
Reply-To: vaisanen@joyds2.joensuu.fi (Jarmo Vaisanen)
Organization: University of Joensuu / Computing Centre
Lines: 52

IIn article <3903.26ebda46@wums2.wustl.edu>, fineberg@wums2.wustl.edu writes:

> Any suggestions as to why it won't work for me?  Also any suggestions as to
> how to remove it from my table?  When I do I get this response:
> 
> WUMC2$ ucx
> UCX> set noroute /addr=0
> 
> Type           Destination                           Gateway
> 
> N   * 0.0.0.0                                                ncrc_ms
> Remove? [N]:y
> %UCX-E-ROUTEERROR, Error processing ROUTE request
> -UCX-E-INVADR, Invalid Internet address:
> UCX>  Exit
> WUMS2$
> 

Funny - I just tried it!
----------------------- From actual display printout --------------------------
UCX> sh route

Type           Destination                           Gateway

NA    128.214.14.0                          128.214.14.1
N     0.0.0.0                               PERSIKKA-GW
UCX> set noroute /address=0

Type           Destination                           Gateway

N   *  .0.0.0                               128.214.14.100   PERSIKKA-GW
Remove? [N]:y
UCX> sh route

Type           Destination                           Gateway

NA    128.214.14.0                          128.214.14.1
-------------------------------------------------------------------------
The only difference I can see is  that Your gateway ncrc_ms didn't seem
to have IP-
address.  Maybe that's the problem.

(I don't actually like the binary database idea in VMS - because it
sometimes crashes
and You can't just try to fix it with vi :-)

Ho`e this helps

Jarmo Vaisanen
University of Joensuu, Computer Centre
PO Box 111, 80101 Joensuu, Finland
(vaisanen@joyx.joensuu.fi)