Path: utzoo!attcan!uunet!zephyr.ens.tek.com!uw-beaver!mit-eddie!bloom-beacon!eru!hagbard!sunic!mcsun!tuvie!iiasa!wnp
From: wnp@iiasa.AT (wolf paul)
Newsgroups: comp.unix.xenix.sco
Subject: Re: Date Highlighted in SHELL !
Summary: Try this -- it works
Keywords: Bourne Shell Date Highlighted
Message-ID: <886@iiasa.UUCP>
Date: 6 Sep 90 09:30:26 GMT
References: <680@csoftec.csf.com>
Reply-To: wnp@iiasa.UUCP (wolf paul)
Organization: IIASA, Laxenburg/Vienna, Austria, Europe
Lines: 71

In article <680@csoftec.csf.com> cmanis@csoftec.csf.com (Cliff Manis) writes:
>At present it will highlight the date if the date is two digit only, and I
>have not  been able to make it highlight the first 9 days of the month. We
>are using SCO 2.3.1 and any help would be appreciated... 
>
># 0datehigh
>
>tod=`date +%d`
>sed 's/'$tod'/'`echo "\033[7m$tod\033[0m"`'/' $tmp2 > $tmp

The reason this does not work for single-digit days is simple: date +%d
always produces double-digit output, prepending '0' to the first nine
days of the month. "CAL" does not do this, therefore the "SED" command
cannot find a match.

Anyway, the script below (tested on Ultrix 3.1, SunOS 4.1, ISC SysVr3.2, and
Xenix 286/2.1.3) does the same thing without temp files, just a pipe,
and fewer calls to executables. What is the second string of ANSI
escape sequences in you original script supposed to do?

Before trying it, replace the two occurrences of "^[" with an actual
escape character, entered in vi by typing "Ctrl-V Escape".

#!/bin/sh
# Cal -- display calendar for current month, with month name and
#        today's date highlighted on an ANSI-compatible terminal
#
#        (to be compatible with other terms, the HIGH and LOW strings
#         should be obtained with "tput smso" and "tput rmso" instead
#         of being hardcoded. Since not all UNIXes have tput, this
#         example is hardcoded).
#
set `date "+%d %m 19%y`		# get the three parts of date we want
DAY=$1
MON=$2
YR=$3
HIGH="^[[7m"		# ^[ should be an actual ESCAPE character
LOW="^[[0m"		# ^[ should be an actual ESCAPE character

# System V "pr" has an -o option to produce a page offset, and
# -t option to prevent it from filling one 66-line page with line
# feeds and headers.

# The "sed" script actually is written in two parts, the first part
# double-quoted to permit the interpolation of shell variables,
# and the second part single-quoted to prevent the "1,$s" command in line 6
# to be interpreted as a shell variable "$s".

# Here is what the sed script does (with line numbers):
# 1: delete all blank lines
# 2: append a space to the end of each line, so we can look for each date
#    both preceded and followed by a space
# 3: make all single-digit days double digit by prepending a '0'
# 4: highlight the name of the month and year
# 5: find today's date and highlight it
# 6: now replace all leading zeros with a space, cause it looks better -
#    but only in lines 2ff, we don't want to change the year "2001" into "20 1"

cal $MON $YR | pr -t  -o27 | sed "
/^$/d
s/$/ /
s/ \([1-9]\) /0\1 /g
1s/ \([A-Z][a-z]* [0-9][0-9]*\) / ${HIGH}\1${LOW} /
s/ $DAY / ${HIGH}${DAY}${LOW} /"'
2,$s/0\([1-9]\)/ \1/g' 
# end of "Cal"
-- 
Wolf N. Paul, IIASA, A - 2361 Laxenburg, Austria, Europe
PHONE: +43-2236-71521-465     FAX: +43-2236-71313      UUCP: uunet!iiasa.at!wnp
INTERNET: wnp%iiasa.at@uunet.uu.net      BITNET: tuvie!iiasa!wnp@awiuni01.BITNET
       * * * * Kurt Waldheim for President (of Mars, of course!) * * * *