Path: utzoo!attcan!uunet!jarthur!usc!wuarchive!julius.cs.uiuc.edu!ux1.cso.uiuc.edu!ux1.cso.uiuc.edu!uxa.cso.uiuc.edu!dlg6627
From: dlg6627@uxa.cso.uiuc.edu
Newsgroups: comp.windows.ms
Subject: Re: 1024x768 Interlaced Monitors
Message-ID: <118500051@uxa.cso.uiuc.edu>
Date: 7 Sep 90 16:51:00 GMT
References: <1804@abvax.UUCP>
Lines: 19
Nf-ID: #R:abvax.UUCP:1804:uxa.cso.uiuc.edu:118500051:000:655
Nf-From: uxa.cso.uiuc.edu!dlg6627    Sep  7 11:51:00 1990



>I use an NEC 3D and had lots of problems with my Trident SVGA card.

>I now use a Tseng card with the 4000 chip (1024 x 768 x 256) and have 
>no problems at all.  The flicker is noticable reduced.  By that I mean
> ........................


In previous response I wrote that I have problem (flickering) when
running windows 3.0 with Tseng 4000 chips and NEC 3D monitor. I also
wrote that it is flickering SOMETIMES.
Now I notice that when I run windows 3.0 in Hi-rez (1024x768x256) mode
and ENHANCED mode (386) I have problem!. However, if I run in STANDARD
MODE OR REAL MODE flickering problem disappear!.

Any idea why it is happening?

-d ludirdja