Path: utzoo!attcan!uunet!know!zaphod.mps.ohio-state.edu!math.lsa.umich.edu!math.lsa.umich.edu!emv
From: whp4@cisco.com (Bill Palmer)
Newsgroups: comp.archives
Subject: [comp.dcom.sys.cisco] Re: snmp
Message-ID: <1990Sep16.014212.18968@math.lsa.umich.edu>
Date: 16 Sep 90 01:42:12 GMT
Sender: emv@math.lsa.umich.edu (Edward Vielmetti)
Reply-To: whp4@cisco.com (Bill Palmer)
Followup-To: comp.dcom.sys.cisco
Organization: (none)
Lines: 17
Approved: emv@math.lsa.umich.edu (Edward Vielmetti)
X-Original-Newsgroups: comp.dcom.sys.cisco

Archive-name: cisco-mib/13-Sep-90
Original-posting-by: whp4@cisco.com (Bill Palmer)
Original-subject: Re: snmp
Archive-site: ftp.cisco.com [131.108.1.27]
Reposted-by: emv@math.lsa.umich.edu (Edward Vielmetti)

>Is there any way to get the collision count for an interface using SNMP?

No.  You can't get the collision count.  You can get a lot of other
interface statistics, though, such as runts, giants, CRC errors,
framing errors, overruns, etc.  See mib.txt on ftp.cisco.com for the
gory detail.

Bill Palmer
cisco