Path: utzoo!attcan!uunet!cs.utexas.edu!know!zaphod.mps.ohio-state.edu!sdd.hp.com!hplabs!hpfcso!j_rodin
From: j_rodin@hpfcso.HP.COM (Jon Rodin)
Newsgroups: comp.dcom.lans
Subject: Re: Win 3.0, Netware 3.01 and Tiara Problems
Message-ID: <7020004@hpfcso.HP.COM>
Date: 12 Sep 90 13:56:50 GMT
References: <14460@rouge.usl.edu>
Organization: Hewlett-Packard, Fort Collins, CO, USA
Lines: 8

>The tiara cards run on interrupt 2.  Is this a problem.  Should
>I emmexclude some memory somewhere.  The io address is 200h and the base
>segment is D000h.  (What are these values anyway?)

I don't know much about the tiara cards, however if they use shared RAM
(as the 'base segment is D000h' would indicate) you do indeed need to 
emmexclude the address space used by the card.  Put the emmexclude statement
in the system.ini file in the [386enh] section.