Xref: utzoo comp.os.msdos.apps:323 comp.sys.ibm.pc.misc:1695
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!unido!sbsvax!jp
From: jp@sbsvax.cs.uni-sb.de (Joachim Philippi)
Newsgroups: comp.os.msdos.apps,comp.sys.ibm.pc.misc
Subject: Problem with Windows 3.0 himem.sys on 386
Keywords: MS-DOS, Windows 3.0, himem.sys
Message-ID: <6533@sbsvax.cs.uni-sb.de>
Date: 14 Sep 90 09:18:59 GMT
Followup-To: poster
Organization: Universitaet des Saarlandes, Saarbruecken, W-Germany
Lines: 46


Problem:
	When himem.sys is loaded I get mess on the screen in windows:
	first the screen looks ok, but when I move the mouse or
	open and close some windows, there appear some "dirty lines"
	on the screen.
	I tried various values for
		emmexclude=paragraph-paragraph
	in SYSTEM.INI (e.g. c400-c7ff as recommended in readme.txt 
	"Using VGA Display Adapters") but without success.

	Without himem.sys, windows runs without any problem
	- but in real mode :-(

Configuration:
	Mainboard PEM-2500 Cache-386 25MHz (Datatech Enterprises)
	Video Adapter Optima 1024 (VGA 16 Bit 512KB, Tseng Chips)
	MS-DOS 3.3
	Phoenix 80386 Rom Bios Plus Version 1.10.01
	AUTOEXEC.BAT as created by Windows Setup
	CONFIG.SYS   as created by Windows Setup
	himem.sys version 2.60, 04/05/90, A20 handler number 1

Any ideas?

Thanks for your help


Joachim


email : philippi@cs.uni-sb.de
  or  : philippi@sbsvax.informatik.uni-saarland.dbp.de
  or  : ...!uunet!unido!sbsvax!philippi
voice : +49 681 302 2065
snail : Joachim Philippi, Universitaet des Saarlandes 
        FB 14 - Informatik, Gebaeude 36, Raum 227, Im Stadtwald 15 
        D-6600 Saarbruecken 11, West Germany
-- 
email : philippi@cs.uni-sb.de
  or  : philippi@sbsvax.informatik.uni-saarland.dbp.de
  or  : ...!uunet!unido!sbsvax!philippi
voice : +49 681 302 2065
snail : Joachim Philippi, Universitaet des Saarlandes 
        FB 14 - Informatik, Gebaeude 36, Raum 227, Im Stadtwald 15 
        D-6600 Saarbruecken 11, West Germany