Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!mips!dimacs.rutgers.edu!srm From: srm@dimacs.rutgers.edu (Scott R. Myers) Newsgroups: comp.sys.amiga.hardware Subject: Re: Hard disk interfaces Message-ID: Date: 17 Sep 90 01:11:04 GMT References: <4411@crash.cts.com> Organization: Rutgers University Lines: 34 In article jmpor@dynam.UUCP (J-M Porchet) writes: > >In article <4411@crash.cts.com> hawk@pnet01.cts.com (John Anderson) writes: > > > > I have seen a 200 megbyte Conner drive with a IDE interface, for an IBM. > >I have never heard of this interface type. Can this be made to connect to a > >SCSI port on a GVP controller or any AMiga SCSI controller for that matter? > > > >/ > No, but you can use it on a A590 or on a GVP accelerator. > > IDE ist sometime called AT-INTERFACE. > > I think it's a conner 209, if it's that there is also a SCSI version > of the HD > > Best Regards, > Do I understand you correctly! I can use an IDE interface hard disk with the A590???? srm -- Scott R. Myers Snail: 26 Stiles Street Phone:(201)882-3100 Apartment 18 Elizabeth, NJ 07201 Arpa: srm@dimacs.rutgers.edu Uucp: ..!dimacs!srm "... No matter where you go, there you are ..."