Path: utzoo!attcan!uunet!cbmvax!cbmehq!babylon!rbabel
From: rbabel@babylon.UUCP (Ralph Babel)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Hard disk interfaces
Message-ID: <03863.AA03863@babylon.UUCP>
Date: 16 Sep 90 01:34:43 GMT
References: <4411@crash.cts.com>
Reply-To: cbmvax.commodore.com!cbmehq!babylon!rbabel (Ralph Babel)
Lines: 13

In article <4411@crash.cts.com> hawk@pnet01.cts.com (John
Anderson) writes:

>   I have seen a 200  megbyte Conner drive with a IDE interface, for an IBM.
> I have never heard of this interface type.  Can this be made to connect to a
> SCSI port on a GVP controller or any AMiga SCSI controller for that matter?

No, can't be connected to a SCSI host adapter directly, but
GVP's '030 accelerator boards have an AT (= IDE) interface
(might be considered a somewhat expensive hard disk
controller, though :-).

Ralph