Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uwm.edu!ogicse!intelhf!agora!billsey From: billsey@agora.uucp (Bill Seymour) Newsgroups: comp.sys.amiga.hardware Subject: Re: Hard disk interfaces Message-ID: <1990Sep17.220252.15118@agora.uucp> Date: 17 Sep 90 22:02:52 GMT References: <4411@crash.cts.com> Organization: Open Communication Forum Lines: 36 In article srm@dimacs.rutgers.edu (Scott R. Myers) writes: :In article jmpor@dynam.UUCP (J-M Porchet) writes: :> >In article <4411@crash.cts.com> hawk@pnet01.cts.com (John Anderson) writes: :> > I have seen a 200 megbyte Conner drive with a IDE interface, for an IBM. :> >I have never heard of this interface type. Can this be made to connect to a :> >SCSI port on a GVP controller or any AMiga SCSI controller for that matter? :> :> No, but you can use it on a A590 or on a GVP accelerator. :> :> IDE is sometimes called AT-INTERFACE. : :Do I understand you correctly! I can use an IDE interface hard disk :with the A590???? The drive internally in the A590 is an IDE drive. To use a different IDE drive, you have to replace the existing drive. Don't know how the software would take that though... :srm :-- : Scott R. Myers : :Snail: 26 Stiles Street Phone:(201)882-3100 : Apartment 18 : Elizabeth, NJ 07201 : :Arpa: srm@dimacs.rutgers.edu Uucp: ..!dimacs!srm : : "... No matter where you go, there you are ..." -- -Bill Seymour ...tektronix!reed!percival!agora!billsey ============================================================================= Bejed, Inc. NES, Inc. Northwest Amiga Group At Home Sometimes (503) 281-8153 (503) 246-9311 (503) 656-7393 BBS (503) 640-0842