Path: utzoo!attcan!uunet!wuarchive!cs.utexas.edu!sun-barr!olivea!tymix!tardis!jms
From: jms@tardis.Tymnet.COM (Joe Smith)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: A3000 drives
Summary: Appendix-E
Message-ID: <1229@tardis.Tymnet.COM>
Date: 19 Sep 90 03:43:27 GMT
References: <7817@helios.TAMU.EDU>
Reply-To: jms@tardis.Tymnet.COM (Joe Smith)
Organization: BT Tymnet, San Jose, CA
Lines: 12

In article <7817@helios.TAMU.EDU> n350bq@tamuts.tamu.edu (Duane Fields) writes:
: there is a jumper on the mother-board marked DF1:/No DF1: that must be changed
:to recognize the drive.
:This is, as far as I can tell not documented in the manual anywhere.

I found J351 documented in the fine print on page E-1 of the small A3000 manual.

-- 
Joe Smith (408)922-6220 | SMTP: jms@tardis.tymnet.com or jms@gemini.tymnet.com
BT Tymnet Tech Services | UUCP: ...!{ames,pyramid}!oliveb!tymix!tardis!jms
PO Box 49019, MS-C41    | BIX: smithjoe | 12 PDP-10s still running! "POPJ P,"
San Jose, CA 95161-9019 | humorous dislaimer: "My Amiga speaks for me."