Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!van-bc! From: lphillips@lpami.wimsey.bc.ca (Larry Phillips) Newsgroups: comp.sys.amiga.hardware Subject: Re: Internal 2090A SCSI Message-ID: <1998@lpami.wimsey.bc.ca> Date: 18 Sep 90 11:42:01 GMT Lines: 29 Return-Path: To: van-bc!rnews In , dwl10@uts.amdahl.com (Dave Lowrey) writes: >I am considering getting a Quantum 105 Meg drive for my A2500. > >I curently have a 2090A with a Rodime ST506 40 Meg drive (internal). > >I have a few questions.... > >1 - Can I hook the Quantum to the INTERNAL SCSI connector on the > 2090A? If so, what sort of cable do I need? Yes. You will need a 50 conductor ribbon cable with a 'Berg' connector on each end. Just take a look at the 2090A's internals connector. Both ends of the cable will require a connetor that will mate with this. >2 - If I do hook up the Quantum to the internal connector, can I still > use my ST506 drive? Which one can/should I boot off of? Yes. Your choice of what to boot from. -larry -- It is not possible to both understand and appreciate Intel CPUs. -D.Wolfskill +-----------------------------------------------------------------------+ | // Larry Phillips | | \X/ lphillips@lpami.wimsey.bc.ca -or- uunet!van-bc!lpami!lphillips | | COMPUSERVE: 76703,4322 -or- 76703.4322@compuserve.com | +-----------------------------------------------------------------------+