Path: utzoo!attcan!uunet!cbmvax!cbmehq!cbmger!peterk
From: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: A590 XT-interface
Keywords: A590, SCSI, IDE
Message-ID: <426@cbmger.UUCP>
Date: 19 Sep 90 06:26:40 GMT
References: <1982@lpami.wimsey.bc.ca> <1097@tau.sm.luth.se> <14484@cbmvax.commodore.com> <Sep.18.08.56.38.1990.25236@dimacs.rutgers.edu>
Reply-To: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Distribution: comp.sys.amiga.hardware
Organization: Commodore Bueromaschinen GmbH, West Germany
Lines: 16

In article <Sep.18.08.56.38.1990.25236@dimacs.rutgers.edu> srm@dimacs.rutgers.edu (Scott R. Myers) writes:
>In article <14484@cbmvax.commodore.com> bj@cbmvax.commodore.com (Brian Jackson) writes:
>
>> I think you are missing an important point here. The A590 will accept
>> a SCSI hard drive as easily as it accepts the IDE drive. So, for
>> your 100 megabyte hard drive, just grab a standard 105 Quantum and a
>> 2 inch long standard SCSI cable. Plug and go. 
>
>How is that so.  Does it actually have two different controllers in
>it?

Yesssiiirrr! PLUS provision (sockets) for 2 MB Fast RAM. Impressing?

-- 
Best regards, Dr. Peter Kittel  // E-Mail to  \\  Only my personal opinions... 
Commodore Frankfurt, Germany  \X/ {uunet|pyramid|rutgers}!cbmvax!cbmger!peterk