Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!uakari.primate.wisc.edu!uflorida!stat!sun13!prism!prism.gatech.EDU!ccastmr
From: ccastmr@prism.gatech.EDU (Mark J. Reed)
Newsgroups: comp.sys.atari.8bit
Subject: ASM/ED low-high byte syntax and vt100 emulator
Message-ID: <13778@hydra.gatech.EDU>
Date: 18 Sep 90 01:28:17 GMT
Sender: ccastmr@prism.gatech.EDU
Organization: Georgia Institute of Technology
Lines: 18


I am posting this question for a friend; I do not normally read this newsgroup,
so please respond by e-mail.

	When using the Assembler/Editor cartridge, how do you indicate that you 
want the low byte or high byte of a labelled address?  <LABEL and >LABEL don't
seem to work...
	Also, where can I find an 80-column vt100 emulator for an 800XL without
the XEP-80 adaptor (but with SpartaDOS COLUMNS.COM)?

	Thanks in advance...

Mark J. Reed
================================================================================
uucp    : ..gatech!cc!mark             | "Ambition is a poor excuse for not
Internet: mark@cc.gatech.edu           |  having sense enough to be lazy."
BITNET  : mark%cc@GITVM1               |	--Charlie McCarthy
================================================================================