Path: utzoo!attcan!uunet!tut.cis.ohio-state.edu!ucsd!nosc!crash!pnet01!arthur
From: arthur@pnet01.cts.com (Arthur L. Rubin)
Newsgroups: comp.sys.atari.8bit
Subject: Re: ASM/ED low-high byte syntax and vt100 emulator
Message-ID: <4500@crash.cts.com>
Date: 19 Sep 90 06:16:07 GMT
Sender: root@crash.cts.com
Organization: People-Net [pnet01], El Cajon CA
Lines: 19

ccastmr@prism.gatech.EDU (Mark J. Reed) writes:
>
>I am posting this question for a friend; I do not normally read this newsgroup,
>so please respond by e-mail.
>
>	When using the Assembler/Editor cartridge, how do you indicate that you 
>want the low byte or high byte of a labelled address?  <LABEL and >LABEL don't
>seem to work...

Have you tried "HIGH" and "LOW"?
--------------------------------------------------------------------------------
Arthur L. Rubin    (home) (714)671-1051
PO Box 9245        (work) (714)961-3771
Brea, CA  92622           MCI Mail: ARUBIN 216-5888
Compuserve:  70707,453
INET: arthur@pnet01.cts.com or arubin@pro-sol.cts.com
UUCP: {hplabs!hp-sdd ucsd nosc}!crash!pnet01![arthur pro-sol!arubin]
ARPA: crash!pnet01![arthur pro-sol!arubin]@nosc.mil
>>> All opinions expressed here are my own and do not represent my employer<<<