Path: utzoo!attcan!uunet!wuarchive!zaphod.mps.ohio-state.edu!think.com!mintaka!olivea!orc!inews!iwarp.intel.com!gargoyle!jpusa1!rick
From: rick@jpusa1.UUCP (Rick Mills)
Newsgroups: comp.sys.atari.st.tech
Subject: Nec 3D and Mega 2
Message-ID: <1894@jpusa1.UUCP>
Date: 14 Sep 90 12:38:06 GMT
Reply-To: rick@jpusa1.chi.il.us (Rick Mills)
Organization: JPUSA - Chicago, IL
Lines: 23



	I've just sold my 386 system and picked up an old
Mega 2 and have tried to connect my Nec 3D monitor to it via
diagrams and a few suggestions. Right now I have something
that kind of works - The lines are connected thru 32 ohm resistors
on the color and sync signals, which works, but there's a shadow
on the text and a bright border on right edges that makes everything
look rather fuzzy and is a strain on the eyeballs... Almost like
the cable isn't sheilded properly, tho I know it is. 
	Anyone have any ideas? Could the signals be crossing over
in the cable? Do I need a lower capacitance cable? Higher resistors?
The signal is at about .6 volts now, if I go lower it gets pretty
dim on the screen...
	Thanks for any suggestions !
	Also - has anyone used the Omni box with the Nec 3d? Does
it work? Maybe that's the easy way out of this...

------

Rick Mills {gargoyle.uchicago.edu,uunet.uu.net,spl1,ddsw1}!jpusa1!rick
-- 
rick