Path: utzoo!attcan!lsuc!maccs!johns
From: johns@maccs.dcss.mcmaster.ca (Conan the Barbarian)
Newsgroups: comp.sys.atari.st.tech
Subject: Need help on floppy drive dip switches
Message-ID: <26F83BCC.13087@maccs.dcss.mcmaster.ca>
Date: 20 Sep 90 03:47:24 GMT
Organization: McMaster University, Hamilton, Ontario, Canada
Lines: 19


	I need to know how to set the DIP switches on floppy drives
that I hacked from SS drives.  One is a Matsushita and the other is an
Epson SMD400.  Matsushita is the same as Panasonic, isn't it?

	And, how does one set these switches to off and on?  There are
two rows of 6 tiny pins and 3 clips with which any 2 adjacent pins can
be connected.  Is this the way all drives work?  

	One other thing, is there a differet switch setting if the drive
is to be used as drive A: or drive B:?

	Thanks for any advice received.

-- 
John Schmitt
johns@maccs.dcss.mcmaster.ca
...!unet!utai!utgpu!maccs!johns
SCHMITTJ@SCIvax.McMaster.CA