Path: utzoo!attcan!uunet!jarthur!usc!zaphod.mps.ohio-state.edu!rpi!batcomputer!hurf
From: hurf@theory.tn.cornell.edu (Hurf Sheldon)
Newsgroups: comp.sys.hp
Subject: DAT Drive on 345 Questions
Keywords: tape, DAT, etc
Message-ID: <1990Sep17.194546.14295@batcomputer.tn.cornell.edu>
Date: 17 Sep 90 19:45:46 GMT
Sender: hurf@batcomputer.tn.cornell.edu (Hurf Sheldon)
Distribution: na
Organization: Cornell Theory Center
Lines: 30


	We just had a DAT installed on our 345 system in the
 	6000 scsi peripherals box. We were told the address was
	set to 0 but can't figure out how to access it. The 
	manual for the 6000 box, which was quite helpful in
	installing a Writable optical disk, lacks much info
	on the DAT. We are running 7.0. 
	What needs to be done to hook access the little fellow?
	What are the major/minor numbers for the scsi tape?
	How would I have known? ('ifconfig -t' has 'stape' -
	is that a scsi tape?) My 7.0 Peripheral Installation
	guide doesn't cover the DAT drive.

	We have the scsi driver patch installed.
	
	=Help appreciated.

	hurf


     Hurf Sheldon			 Network: hurf@theory.tn.cornell.edu
     Program of Computer Graphics	 Phone:   607 255 6713
     580 Eng. Theory Center,
     Cornell University, Ithaca, N.Y. 14853  
     
-- 
     Hurf Sheldon			 Network: hurf@theory.tn.cornell.edu
     Program of Computer Graphics	 Phone:   607 255 6713

     580 Eng. Theory Center, Cornell University, Ithaca, N.Y. 14853