Xref: utzoo comp.sys.ibm.pc.hardware:1574 comp.periphs:3130
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!ucsd!rutgers!njin!princeton!mccc!pjh
From: pjh@mccc.uucp (Pete Holsberg)
Newsgroups: comp.sys.ibm.pc.hardware,comp.periphs
Subject: MAXTOR HD Device Select Jumpers
Message-ID: <1990Sep18.003817.1753@mccc.uucp>
Date: 18 Sep 90 00:38:17 GMT
Organization: The College On The Other Side Of Route One
Lines: 19

I have a Maxtor XT-2190 and don't know how to set the DS jumpers.  In
fact, there's nothing marked DS at all.  I think the most likely
candidate is a single row of pins between U16 and U20 at the edge
connector end of the PC board.  The pins are numbered 1 through 6 and
5-6 were jumpered as delivered.

The drive is going into an AT/386 and I need to set it as the second
drive.

If anyone has real info and is willing to fax it to me, I'd be mnuch
obliged.  609-586-6944

Many thanks,
Pete
-- 
Prof. Peter J. Holsberg      Mercer County Community College
Voice: 609-586-4800          Engineering Technology, Computers and Math
UUCP:...!princeton!mccc!pjh  1200 Old Trenton Road, Trenton, NJ 08690
Internet: pjh@mccc.edu	     Trenton Computer Festival -- 4/20-21/91