Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!ut-emx!frank
From: frank@ut-emx (Frank Abernathy)
Newsgroups: comp.sys.ibm.pc.misc
Subject: Re: Upgrading Original IBM PC
Summary: ROM Upgrades
Message-ID: <37204@ut-emx>
Date: 14 Sep 90 19:36:38 GMT
References: <4396@crash.cts.com>
Organization: The University of Texas at Austin; Austin, Texas
Lines: 28

In article <4396@crash.cts.com>, jims@pro-berks.cts.com (Jim Sloan) writes:
> In-Reply-To: message from crosenberg@cdp.UUCP
> 
> You must first upgrade the BIOS on the 5150 PC for it to use DOS 3.x.  I don't

I am not sure if this REALLY applies, but down below are some folks that sell
ROM Bios for PCs and clones.

> know where you can get a BIOS for it though.  Also, the memory upgrade will be
> necessary.  There was some recent talk on the FidoNet about someone upgrading
> a 5150, so I'll check over there and see if anyone remembers what had to be
> done.
> Jim

Upgrades, Etc. 800-541-1943

Self Reliant PC Service  808-521-5525

Mr. Bios   408-396-4096.

YOU contact them and determine if they have what YOU want....

later
frank

-- 
Frank Abernathy, University of Texas at Austin, frank@ut-emx.utexas.edu
Work: (512)-471-3216      Home: (512)-244-0625 (ans. mach always on...)