Path: utzoo!attcan!uunet!ns-mx!iowasp.physics.uiowa.edu!maverick.ksu.ksu.edu!ux1.cso.uiuc.edu!julius.cs.uiuc.edu!usc!samsung!munnari.oz.au!uhccux!ames!dftsrv!jagmac2.gsfc.nasa.gov!jim
From: jim@jagmac2.gsfc.nasa.gov (Jim Jagielski)
Newsgroups: comp.unix.aux
Subject: EtherPort II drivers available for 2.0 (TCP/IP only!)
Message-ID: <3410@dftsrv.gsfc.nasa.gov>
Date: 14 Sep 90 11:12:29 GMT
Sender: news@dftsrv.gsfc.nasa.gov
Reply-To: jim@jagmac2.gsfc.nasa.gov (Jim Jagielski)
Organization: NASA Goddard Space Flight Center
Lines: 28

I have made available via anonymous ftp, the EtherPortII drivers for the
EtherPortII card. These drivers are for A/UX 1.1, but they do work under
2.0 as long as you use the card/interface ONLY for TCP/IP communication
(The Apple card will also support AppleTalk over EtherNet...these drivers
for the EPII won't!).

The file is a compressed tar archive called EPIIdr.tar.Z (or something VERY
close to that). The easiest way to install is to copy this file to /tmp
then uncompress and tar-extract the file:

	$ mv EPIIdr.tar.Z /tmp
	$ uncompress EPIIdr.tar.Z
	$ tar xvf EPIIdr.tar

Then install by "csh install.script"

Please read the AUX_README file which is included!

And please send me Email if you have any problems!
--
=======================================================================
#include <std/disclaimer.h>
                                 =:^)
           Jim Jagielski                    NASA/GSFC, Code 711.1
     jim@jagmac2.gsfc.nasa.gov               Greenbelt, MD 20771

"Kilimanjaro is a pretty tricky climb. Most of it's up, until you reach
 the very, very top, and then it tends to slope away rather sharply."