Path: utzoo!attcan!uunet!zephyr.ens.tek.com!uw-beaver!rice!cs.utexas.edu!usc!elroy.jpl.nasa.gov!ames!dftsrv!jagmac2.gsfc.nasa.gov!jim
From: jim@jagmac2.gsfc.nasa.gov (Jim Jagielski)
Newsgroups: comp.unix.aux
Subject: EtherPortII and the IIfx
Message-ID: <3411@dftsrv.gsfc.nasa.gov>
Date: 14 Sep 90 11:26:18 GMT
Sender: news@dftsrv.gsfc.nasa.gov
Reply-To: jim@jagmac2.gsfc.nasa.gov (Jim Jagielski)
Distribution: na
Organization: NASA Goddard Space Flight Center
Lines: 16

This message is mainly to Paul Caloca, but also for anyone else who may
know:

I am upgrading my MacII (with the Daystar 50MHz Powercard) to a IIfx. I
really need to know if the system will continue to work using the EtherPortII
card and the 1.1 drivers. They work now, and I hope that the change over
to the IIfx won't create problems!
--
=======================================================================
#include <std/disclaimer.h>
                                 =:^)
           Jim Jagielski                    NASA/GSFC, Code 711.1
     jim@jagmac2.gsfc.nasa.gov               Greenbelt, MD 20771

"Kilimanjaro is a pretty tricky climb. Most of it's up, until you reach
 the very, very top, and then it tends to slope away rather sharply."