Path: utzoo!attcan!uunet!mcsun!ukc!icdoc!qmw-cs!liam
From: liam@cs.qmw.ac.uk (William Roberts)
Newsgroups: comp.unix.aux
Subject: Re: Ethernet card/driver for Mac IIfx & AUX 2.0
Keywords: ethernet, aux, install
Message-ID: <2807@sequent.cs.qmw.ac.uk>
Date: 17 Sep 90 10:05:58 GMT
References: <21926@mvis1.com>
Organization: Computer Science Dept, QMW, University of London, UK.
Lines: 30

In <21926@mvis1.com> pcaloca@synoptics.COM (Paul Caloca) writes:


>Does anyone know of a driver for a Kinetics EtherPort II that AUX will
>work with? Are there any other ethernet cards and drivers that AUX
>can recognize? The friendly Apple Technical AnswerLine folks say only
>the Apple Ethernet card will operate with AUX 2.0 and they are expensive
>and in short supply. 

The Apple Technical AnswerLine folks are being economical with the truth.
The A/UX 1.1.1 driver for the old Kinetics Etherport II card will work
with A/UX 2.0, but it won't support the EtherTalk printing. It is enough
to give you NFS and TCP however.

>I've just installed AUX 2.0 on my Mac IIfx and it crashes when AUX is
>started. Apple suggested I remove the EtherPort card and restart and
>all works fine, but I now have no access to my NFS network and TCP/IP.
>Can someone let me know where I can ftp a driver for the card or
>recommend an alternate ethernet card/driver combo that works?

You must NOT enable the Kinetics Ethernet driver under MacOS before you
boot A/UX. Apart from that advice, I know no reason why the Etherport II
card shouldn't work on your IIfx - it worked fine in a IIfx I had for 1 day
running A?UX 2.0 b10.
-- 

William Roberts                 ARPA: liam@cs.qmw.ac.uk
Queen Mary & Westfield College  UUCP: liam@qmw-cs.UUCP
Mile End Road                   AppleLink: UK0087
LONDON, E1 4NS, UK              Tel:  071-975 5250 (Fax: 081-980 6533)