Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!know!zaphod.mps.ohio-state.edu!sdd.hp.com!elroy.jpl.nasa.gov!hacgate!janus!cws From: cws@janus.Quotron.com (Craig W. Shaver) Newsgroups: comp.unix.sysv386 Subject: Re: Completely frustrated by SCSI / ISC combo Summary: no problems with 2.2 Message-ID: <612@janus.Quotron.com> Date: 13 Sep 90 00:09:05 GMT References: <9524@ubc-cs.UUCP> Organization: Quotron Systems Inc., Los Angeles Lines: 28 In article <9524@ubc-cs.UUCP>, rlin@cs.ubc.ca (Robert Lin) writes: > Here's my horror story on trying to get a SCSI system to work with > ISC 2.0.2. > > I have an Adaptec 2732B RLL controller, which I am quite happy with. > I needed to add more disk storage, so I thought it would be a neat > idea to grab that spare 330M Miniscribe 9380S and hook it up to > an Adaptec 1540B. ... > > Has any one else had any luck with AHA-1542B (only boot device) and > ISC 2.0.2? If so, what's the trick?? > > -Robert Lin I have tried the 1542b with a 1684-7 micropolis under ix-2.2. It worked great. It was slow coming up, but only because of the ffs init sequence. The 1542 used int 11 as the default. Maybe the drive is the problem, try to get ahold of Roy Neese of adaptec (seen around these parts recently). Craig W. Shaver ================================================================ Quotron Systems Inc. | Phone: (213) 302-4247 5454 Beethoven Street | uucp: hacgate!janus!cws Post Office Box 66914 | craig@tradr2.quotron.com Los Angeles, CA 90066 | ================================================================