Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!decwrl!bacchus.pa.dec.com!shlump.nac.dec.com!tkou02.enet.dec.com!jitgmn.enet.dec.com!shimizu From: shimizu@jitgmn.enet.dec.com (Hidetoshi Shimizu) Newsgroups: comp.unix.sysv386 Subject: Re: Use Microsoft Serial mouse with COMPAQ 486/25 on SCO 3.2.2 Message-ID: Date: 17 Sep 90 13:58:41 GMT References: Sender: news@tkou02.enet.dec.com (USENET News System) Distribution: comp Organization: Digital Equipment Corporation Japan Lines: 21 In-Reply-To: shimizu@jitgmn.enet.dec.com's message of 11 Sep 90 21:10:35 > I installed Xsight and TCP/IP on 486/25. But I can't use a Microsoft > Serial mouse. I connected a mouse to pointer interface at back panel. > So I selected #2(Microsoft serial mouse) and tty01 and serial port > /dev/tty1a, when mkdev mouse. This problem closed myself. I connected a mouse into a serial port on DESKPRO 486/25. But DESKPRO 486/25 has a mouse I/F. I'd like to use a this I/F. I selected a device of Microdoft bus mouse when mkdev mouse. And reboot a unix. Then I start a startx command but unix was occued error "Open driver faild::No such device or address". What a driver must I select to use a Microsoft Serial mouse into a mouse I/F on DESKPRO 486/25. -- Hidetoshi Shimizu Financial-2 EIC