Path: utzoo!attcan!uunet!know!samsung!cs.utexas.edu!yale!bunker!hcap!hnews!369!8!Rick.Alfaro
From: Rick.Alfaro@f8.n369.z1.fidonet.org (Rick Alfaro)
Newsgroups: misc.handicap
Subject: Re: vocal-eyes
Message-ID: <14130@bunker.UUCP>
Date: 14 Sep 90 14:02:27 GMT
Sender: wtm@bunker.UUCP
Reply-To: Rick.Alfaro@f8.n369.z1.fidonet.org
Distribution: misc
Organization: FidoNet node 1:369/8 - The Catwalk BBS, Davie FL
Lines: 36
Approved: wtm@bunker.UUCP

Index Number: 10362

[This is from the Blink Talk Conference]

> Well, Doug, I got too happy to quick.  As a matter of
> fact, I was so sure we had found the problem with /!l3, that
> I fixed it on my hard disk, and it still did not work.  So I
> did what you suggested, and  made a bootable floppy disk,
> and put the following autoexec.bat on it.
 
> @echo off
> accent /!c1 /!l3
 
Walter,
 
The above line is incorrect.  Take out he /!c1 and leave the /!l3..
 
accent /!l3
 

What is happening is that you are telling the accent driver 2
different ports a5t the same time.  I am sure that the driver is
seeing your first comand line switch (/!c1) and trying to use com1
when it should be using lpt3.  The /1l3 means, use lpt3 which is
what yopu need for your internal accent.  I am almost %100 sure
that this is your problem.  Here is the line again...

accent /!l3

Hope this helps.  Regards,

Rick

--
Uucp: ..!{decvax,oliveb}!bunker!hcap!hnews!369!8!Rick.Alfaro
Internet: Rick.Alfaro@f8.n369.z1.fidonet.org