Xref: utzoo comp.dcom.lans:5987 bit.listserv.novell:6598 Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!uwm.edu!wuarchive!psuvax1!njin!ccoombs From: ccoombs@pilot.njin.net (Cliff Coombs) Newsgroups: comp.dcom.lans,bit.listserv.novell Subject: NW Token Ring File Server install prob. Message-ID: Date: 19 Sep 90 23:58:25 GMT Followup-To: comp.dcom.lans Distribution: usa Organization: NJ InterCampus Network, New Brunswick, N.J. Lines: 23 I'm installing a Netware (2.15) server on Token Ring. I have installed a few before on Ethernet. The server is a PS/2 model 80 with 2 meg o' RAM. After completing NETGEN, I boot the server and get: Error Initializing LAN Driver: Error initializing IBM Token Ring Board The server will be shut down. I'm using the drivers supplied with Netware version 2something. Any Ideas? I tried the whole NETGEN process a couple times... Am I forgetting something? What's different about token Ring or the model 80? Should I use different drivers? Maybe settings on the Token Ring card? Thanks in advance, Cliff -- Cliff Coombs Voice (201) 527-2729 Fax (201) 355-5143 Campus Network Administrator ccoombs@pilot.njin.net Kean College of New Jersey ccoombs@bart.kean.edu Disclaimer: "I know noth-ing" -Schultz (Hogan's Heros) ccoombs@NJIN.BITNET