Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!tut.cis.ohio-state.edu!uc!cs.umn.edu!kksys!orbit!pnet51!melanie
From: melanie@pnet51.orb.mn.org (Melanie Bennin)
Newsgroups: comp.dcom.modems
Subject: Re: Why won't my T2500 do V.32?
Message-ID: <3252@orbit.cts.com>
Date: 23 Sep 90 15:05:01 GMT
Sender: root@orbit.cts.com
Organization: People-Net [pnet51], Minneapolis, MN.
Lines: 11

My guess is that you have a daughterboard in your modem, and that it shook
loose during shipment.  I had the same problem.  Telebit recommended that I
unscrew the 4 screws on the bottom, remove the cover, and gently press down
on the daughterboard.  Apparently they are now using some glue to make sure
this doesn't happen with new T2500's, but some got out.  When I opened my
T2500's up, the daughterboard was just barely attached.  Pressing it down did
the trick.

UUCP: {amdahl!bungia, crash}!orbit!pnet51!melanie
ARPA: crash!orbit!pnet51!melanie@nosc.mil
INET: melanie@pnet51.orb.mn.org