Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!wuarchive!zaphod.mps.ohio-state.edu!tut.cis.ohio-state.edu!uc!shamash!vtcqa
From: vtcqa@shamash.cdc.com (Jeff Comstock)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: ka9q remote command
Keywords: ka9q, remote
Message-ID: <26109@shamash.cdc.com>
Date: 22 Sep 90 20:29:41 GMT
References: <11@mplex.UUCP>
Reply-To: vtcqa@shamash.UUCP (Jeff Comstock)
Organization: Control Data Corporation, Arden Hills, MN
Lines: 23

In article <11@mplex.UUCP> fff@mplex.UUCP (Fred Fierling) writes:
>Is there a trick to using the ka9q remote command?  I can't get the remote
>to work following the documentation.  Here is the autoexec.net entry on the
>remote box:
>
>  start remote -p 2000 -s foobar
>
>Here is my command to reset the remote processor:
>
>  remote -p 2000 -k foobar 128.189.n.n reset
>

The 'start remote' command only starts the server.  Try this on the remote:

start remote
remote -s foobar

Then execute this on the local machine:

remote -k foobar 128.189.n.n reset


Jeff