Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!know!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!aplcen!haven!decuac!bacchus.pa.dec.com!buzzer.enet.dec.com!gerber
From: gerber@buzzer.enet.dec.com (Robert M. Gerber)
Newsgroups: comp.sys.amiga
Subject: Re: Citizen GSX-140 printer trouble
Message-ID: <1990Sep26.130400@buzzer.enet.dec.com>
Date: 26 Sep 90 17:06:21 GMT
References: <8642@jarthur.Claremont.EDU>
Sender: news@wrl.dec.com (News)
Reply-To: gerber@oldjon.enet.dec.com
Distribution: comp.sys.amiga
Organization: Digital Equipment Corporation
Lines: 22

In article <8642@jarthur.Claremont.EDU>, rolee@jarthur.Claremont.EDU
(Profess'nal Agitator) writes:
|> I have a Citizen GSX-140 printer and use Excellence! often.  The problem I
|> have is that the printer does not interpret the vertical margin settings
|> from Excellence!  I found, by trial and error, that I need to format my
|> documents on screen first and then adjust the margins by subtracting .5 inch
|> from the top and adding .5 inch to the bottom.  Otherwise, the printer ends
|> up sending the output too low ('bout .5 inch).  I figure there is probably
|> some setting on my printer I can use to fix it, but so far I haven't found
|> anything in the manual.

I have one of these also, and had a similar problem.  The fix is in the
adjustment to TOP OF FORM.   Lokk it up in the Index of the printer manual. 
(Mine is not handy.)  The adjustment is very easy and is actually needed for
most programs....
------------------------------------------------------------------------
---------
Robert M. Gerber		  UUCP:	...!decwrl!oldjon.enet!gerber
				  INET:	gerber@oldjon.enet.dec.com

Any opinions represented here are definetly not those of my employer.
Come to think of it, they may not be mine either!