Path: utzoo!attcan!uunet!snorkelwacker!usc!cs.utexas.edu!lgc.com!news
From: max@ (Max Heffler)
Newsgroups: comp.sys.apple2
Subject: Kermit/Telebit question
Message-ID: <1990Sep24.021759.13535@lgc.com>
Date: 24 Sep 90 02:17:59 GMT
Sender: news@lgc.com
Organization: Landmark Graphics Corp., Houston, Tx
Lines: 17
Nntp-Posting-Host: maxsun.lgc.com

I have finally found the solution to my poor throughput when using a Telebit
modem above 2400 baud.  There is a switch setting, S111, that will cause the
modem to speak uucp, xmodem, or kermit.  When I changed the setting to 10
for kermit, I was getting very respectable throughtput, close to the
theoretcal maximums for each baud I tested; however, my new problem is
wildcarding.  When the modem is in this kermit mode, the second or third
file in the wildcard hangs until I press ^C, after which it continues on
its way.  This happens multiple times.  Does anybody know of another
unix stty I must disable to solve this problem?  (I already had to
set the terminal server attn char from ^A to none, so kermit would work
at all).
Thanx in advance...
--
Max Heffler			internet: max@lgc.com
Landmark Graphics Corp.		uucp: ..!uunet!lgc!max
333 Cypress Run, Suite 100      phone: (713) 579-4751
Houston, Texas  77094