Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!saxony!pesch From: pesch@pa.reuter.COM (Roland Pesch) Newsgroups: comp.sys.atari.st.tech Subject: Re: TOS 1.4 vs old (1988) ICD HD utils [solved] Summary: Thanks to all who helped, and details of what works and what doesn't. Keywords: TOS 1.4, ICD, icdboot, bombs Message-ID: <413@saxony.pa.reuter.COM> Date: 25 Sep 90 00:18:34 GMT Organization: Reuter:file Inc (A Reuter Company) Palo Alto, CA Lines: 43 [I *think* this didn't make it out the first time; apologies if I'm wrong, and cluttering up the net.] My thanks to all who responded wrt my problem (TOS 1.4/old ICD utils incompatibility), most notably "Hardware Dave" hardware@rose.waterloo.edu, who actually had previous experience of the problem; Shoou-yu Tang (sytang@skyblue.ACNS.ColoState.Edu), who thought he did too; and also to those others who simply offered sympathy and encouragement... I'm now happily reading from my hard disk again. The problem was indeed, as seemed likely, the old icdboot program. For "the record", here are the specifics ---in case they are of use to someone planning an upgrade to TOS 1.4: --> icdboot.prg version 2.1 CRASHES RELIABLY (even when it is the *only* startup) under TOS 1.4. (I went and crashed off floppy one last time to get that version number, after everything was fixed. Two bombs, if anyone counts) --> the latest version from ICD's bulletin board (815) 968-2229, as of a few weeks ago, works fine. In particular, I am now successfully using version 4.8.4 with TOS 1.4. --> it is NOT necessary to reinitialize the hard disk to switch. In case it matters, the computer is a 1040 STFM with the following arcane markings on its motherboard: C07053-001 REV. C GX-211 V0 1986 /Roland Roland Pesch pesch@pa.reuter.com (415) 327-1700 :Reuters::425 Sherman Av., Ste 200::Palo Alto CA::94306: -- Roland Pesch pesch@pa.reuter.com (415) 327-1700 :Reuters::425 Sherman Av., Ste 200::Palo Alto CA::94306: