Path: utzoo!attcan!uunet!jarthur!usc!kodkod.usc.edu!ami
From: ami@kodkod.usc.edu (Ami Motro)
Newsgroups: comp.sys.att
Subject: Problem with cu script when uugetty is running
Message-ID: <27281@usc.edu>
Date: 25 Sep 90 17:00:17 GMT
Sender: news@usc.edu
Organization: University of Southern California, Los Angeles, CA
Lines: 19
Nntp-Posting-Host: kodkod.usc.edu
Originator: ami@kodkod.usc.edu

Hello 3B2 experts:

I have recently changed the port program on my 3B2 from "getty" to "uugetty".
With uugetty running, I should still be able to "cu" or "uucico".  

It seems, though, that when I run cu (or uucico), the modem (a hayes
compatible) does not respond to the AT command in the Dialers script with OK.

It appears that the reason is the high DTR signal (from uugetty), because when
I kill "cu", the DTR goes away for a while (until uugetty reasserts it), and in
this period the Dialers script works fine.

Any clean solution to this problem?

Thanks in advance.

Ami Motro

ami@usc.edu