Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!wuarchive!mit-eddie!uw-beaver!ubc-cs!alberta!mts.ucs.UAlberta.CA!ualtavm!RDENHAM
From: RDENHAM@vm.ucs.UAlberta.CA (User name Unknown)
Newsgroups: comp.sys.ibm.pc
Subject: RGB palettes
Message-ID: <928@vm.ucs.UAlberta.CA>
Date: 26 Jun 90 16:07:50 GMT
Reply-To: RDENHAM@vm.ucs.UAlberta.CA
Distribution: na
Organization: University of Alberta VM/CMS
Lines: 9
Disclaimer: Author bears full responsibility for contents of this article
 
 
   I have been trying to do some graphics programming with a VGA card,
 but I cannot find any documentation on changing the graphics palette
 at the level of the BIOS.  It should be simple enough, but the usual
 information I have on BIOS interrupts was written before the advent of
 RGB palettes.  I would much appreciate it if someone familiar with
 low-level programming could give me a reference.  Thanks...
 
  Graham Denham

Disclaimer: Author bears full responsibility for contents of this article
 
 
   I have been trying to do some graphics programming with a VGA card,
 but I cannot find any documentation on changing the graphics palette
 at the level of the BIOS.  It should be simple enough, but the usual
 information I have on BIOS interrupts was written before the advent of
 RGB palettes.  I would much appreciate it if someone familiar with
 low-level programming could give me a reference.  Thanks...
 
  Graham Denham