Path: utzoo!attcan!uunet!know!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!pikes!mercury.cair.du.edu!news
From: tjreynol@zephyr.cair.du.edu (Theresa)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: IDE Master/Slave  ..  Jumper positions
Summary: help
Message-ID: <1990Sep25.133054.547@mercury.cair.du.edu>
Date: 25 Sep 90 13:30:54 GMT
References: <603@secola.Columbia.NCR.COM> <1990Sep24.190445.3643@uni-paderborn.de>
Sender: news@mercury.cair.du.edu (netnews)
Organization: University of Denver
Lines: 14

In article <1990Sep24.190445.3643@uni-paderborn.de> ill@uni-paderborn.de (Markus Illenseer) writes:

>Never heard about this. The only Idea I have is to jumper the IDE drive as
>master drive. (All IDE drives can be jumpered as master and as slave drive.)
>CU, Markus

I have 2 ST-1162A Imprimis/Seagate Ide drive that i would like to
hook together.
each has 7-pairs of pins, but every jumper combo i have tried has failed.
Any suggestions?

thanks,

Tim