Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!know!zaphod.mps.ohio-state.edu!sdd.hp.com!ucsd!nosc!manta!welsh
From: welsh@manta.NOSC.MIL (Robert C. Welsh)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Switch Settings for AMI exp mem bd
Message-ID: <1221@manta.NOSC.MIL>
Date: 25 Sep 90 18:14:42 GMT
Distribution: usa
Organization: Naval Ocean Systems Center, San Diego
Lines: 13


      I have an AT multi-funtion (serial port + exp. mem) board
apparently made by AMI for which  I have no documentation |<. (
                                                          |<. (
There are two switch packs: SWPack #1 has 8 switches, SWPack #2
has 4 switches. I have 512k on the motherboard and 3584k on the
card (3 banks of 512k ea. on the main card and 4 banks on the
piggyback card). The first 256 on the card should "round out"
the motherboard mem to 640k (if it were an AST Advantage). Could
some kind soul please spot me some info on these switch settings?
Thanx in advance!

Robert Welsh -- welsh@manta.nosc.mil