Path: utzoo!attcan!uunet!aplcen!uakari.primate.wisc.edu!zaphod.mps.ohio-state.edu!usc!snorkelwacker!ira.uka.de!smurf!nadia!bulli From: bulli@nadia.stgt.sub.org (Thomas Bullinger) Newsgroups: comp.sys.misc Subject: Re: TSR To swap drives A: & B: Message-ID: <1363@nadia.stgt.sub.org> Date: 20 Sep 90 03:01:06 GMT References: <9009190706.AA19363@ucbvax.Berkeley.EDU> Organization: Stuttgart Net Systems, FRG Lines: 41 55srwlgs@SACEMNET.AF.MIL ("55SRWLGS") writes: > I have a 386 machine, with a 40 meg winchester and >two floppy drives. Drive a: is a 720K 3 1/2", while >drive b: is a 360K 5 1/4". We don't use drive a: much, > since most of our floppies are 360K 5 1/4"-ers. > I can use ASSIGN in our MS-DOS 4.01 to make the >system think drive a: is b:, but this can't work with a >lot of programs, including the FORMAT command. Is there >a TSR which will let me swap a: and b: for everything? >I'm too lazy to open up the CPU, and it's too new to tinker >with, just yet. >Frank Starr >55srwlgs@sacemnet.af.mil The following is a short TSR program for the PC. It's called TAB.COM and simply interchanges drive A: and B:; so after loading it all accesses to A: go to B: and vice-versa. Sorry for only posting the binary, but a don't have any documentation for it. BEGIN-----Cut here-----Cut here-----Cut here-----Cut here---- begin 666 tab.com MZSJ0```````NB!8#`8#Z`'0(@/H!=`CK"Y"R`>L&D+(`ZP&04%6+[(M&"(=& M`ETN_QX$`2Z*%@,!R@(`N!,US2$NB1X$`2Z,!@8!N!,EN@@!C,N.V\TA_+0& ML``SR;I0&;<'5