Path: utzoo!attcan!uunet!know!zaphod.mps.ohio-state.edu!uwm.edu!bionet!ames!dftsrv!jagmac2.gsfc.nasa.gov!jim From: jim@jagmac2.gsfc.nasa.gov (Jim Jagielski) Newsgroups: comp.unix.aux Subject: Re: Ethernet card/driver for Mac IIfx & AUX 2.0 Keywords: ethernet, aux, install Message-ID: <3479@dftsrv.gsfc.nasa.gov> Date: 24 Sep 90 14:36:27 GMT References: <1990Sep15.193047.11354@ariel.unm.edu> <3429@dftsrv.gsfc.nasa.gov> <45070@apple.Apple.COM> Sender: news@dftsrv.gsfc.nasa.gov Reply-To: jim@jagmac2.gsfc.nasa.gov (Jim Jagielski) Organization: NASA/Goddard Space Flight Center Lines: 31 In article <45070@apple.Apple.COM> justin@Apple.COM (Justin Walker) writes: >In article <3429@dftsrv.gsfc.nasa.gov> jim@jagmac2.gsfc.nasa.gov (Jim Jagielski) writes: >>In article <1990Sep15.193047.11354@ariel.unm.edu> einhorn@triton.unm.edu (E Drew Einhorn ADV.SCI.Inc) writes: >>This script should be run when the EPII-kernel is booted for the 1st time. >>It gets the host name, domain name, IP adrresss, etc... from the user and puts >>them in the appropriate files: /etc/HOSTNAME and /etcNETADDRS. If you remove >>these files and reboot, the script should be rerun again, otherwise edit them >>to what they should be. > For A/UX 2.0, the startup scripts shouldn't try to chat with the > user; this should be done at "newconfig" time instead. The 2.0 startup > regimen assumes NO user interactions. > As mentioned before... these drivers and docs are for 1.1 although they will work for 2.0 (that is the driver part) they are not 2.0 aware or "tuned". Hopefully the new drivers from Dayna will be better. -- ======================================================================= #include =:^) Jim Jagielski NASA/GSFC, Code 711.1 jim@jagmac2.gsfc.nasa.gov Greenbelt, MD 20771 "Kilimanjaro is a pretty tricky climb. Most of it's up, until you reach the very, very top, and then it tends to slope away rather sharply."