Path: utzoo!attcan!telly!lethe!becker!hybrid!scifi!bywater!uunet!robecdc!ghost
From: ghost@robecdc.UUCP (William Sneed)
Newsgroups: comp.unix.xenix.sco
Subject: Re: XENIX TCP/IP ... HELP!!!
Summary: Delayed Boot Syndrome
Message-ID: <3@robecdc.UUCP>
Date: 19 Sep 90 13:58:57 GMT
References: <4534@bu-tyng.bu.edu>
Reply-To: ghost@robecdc.UUCP (William Sneed)
Distribution: usa
Organization: Robec Distributors Inc., D.C. Office
Lines: 27

In article <4534@bu-tyng.bu.edu> kleiner@bu-tyng.bu.edu (Ken Kleiner) writes:
>
>Hi,
>	We are running on a WYSE 386 (WY3225-01) with 16 MB of RAM,
>	380 MB hard disk.  I have a 50MB root f.s., 30 MB swap and 
>	a /u to take up the rest.  
>	After TCP/IP install, the kernel is about 590K.  
>	5.  When I hit CR to boot the default kernel (hd(40)xenix), 
>	    the system rebooted!  Meaning, it cleared the screen, 
>	    did the memory check, and executed /boot again.  
>	    Everytime I hit CR, it does this.  
>	Have you ever experienced this?  

The infamous A20 pin rears its hoary head once more.

Solution is currently available from SCO and/or your dealer/distributor.
What you want is the fix 'xnx126' this is on-line at SCO on sosco, and
should be available from the folks who got you going.

I have it here, if it comes to that.


-- 
-William A. Sneed	 | All words are from me not my employer. All errors
-ghost@dc.robec.COM      | are mine, all the glory is mine, all the flames are
-(703) 631-4800 x114	 | mine, good, bad and ugly it's all mine. :-{> :-{> :-)
-------------------------| God grant me the Serenity....