Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!aplcen!uakari.primate.wisc.edu!zaphod.mps.ohio-state.edu!unix.cis.pitt.edu!gvlv2!lgnp1!phil
From: phil@lgnp1.LS.COM (Phil Eschallier)
Newsgroups: comp.unix.xenix.sco
Subject: FAS on xenix (286)
Keywords: FAS 2.07 XENIX 2.3.2 (286)
Message-ID: <5442@lgnp1.LS.COM>
Date: 25 Sep 90 12:09:30 GMT
Organization: Lagniappe Systems [Doylestown PA]
Lines: 21


netters ...
i just installed FAS 2.07 on my xenix 80286 box -- all is working great
except for rts/cts flow control.  then using dialTBIT to call out (uucico
or cu), the ctsflow and rtsflow are set (i can verify this w/ stty).  however
when the connections is made and the dialTBIT terminates (w/ status = 0),
control is return to uucico (or cu).  at this point, my cts/rtsflow setting
have disappeared.

the question is, am i doing something wrong or does the 286 version of xenix
just assume no one could ever use hardware flow control??  any help would
be appreciated (remember this is the 286 version)!!

thanx,
phil

-- 
Phil Eschallier   * Domain: phil@ls.com           SNAIL: 248B Union Street
                  *   UUCP: ...!uunet!lgnp1!phil         Doylestown, PA  18901
Lagniappe Systems *    CIS: 71076,1576            VOICE: +1 215 348 9721
Computer Services *