Path: utzoo!attcan!uunet!know!cs.utexas.edu!sun-barr!newstop!male!mutchler From: mutchler@zule.EBay.Sun.COM (Dan Mutchler) Newsgroups: comp.windows.ms Subject: Re: Faxing and Windows 3 Message-ID: Date: 26 Sep 90 15:15:56 GMT References: <1990Sep26.013706.24612@agate.berkeley.edu> <24958@sequoia.execu.com> Sender: news@male.EBay.Sun.COM Lines: 36 In-reply-to: cb@sequoia.execu.com's message of 26 Sep 90 13:26:02 GMT In article <24958@sequoia.execu.com> cb@sequoia.execu.com (Christopher D. Brown) writes: In article <1990Sep26.013706.24612@agate.berkeley.edu> magid@headcrash.Berkeley.EDU (Paul Magid) writes: > The software that comes with the EzFax 96i, that I have, is incompatible >with Windows 3. The program works, however there are trasmission errors / >problems. The only way {I have found} to solve the problems is to give the >program exclusive dibs on the CPU. Are there any Windows 3 fax programs that >will work with my board? Any help will be appreciated. I spent $460 for the Intel Connection Coprocessor rather than $200 for EzFax to assure a good fit into the Windows environment. Since I have yet to take delivery, I can not gloat over my choice. A product called "FAX It" (??) may help, but I would expect that exclusive mode will be required for any DOS based solution. Hope this helps ... Chris -- Christopher D. Brown Digital: {uunet|cs.utexas.edu}!execu!cb Analog: (512) 327-7070 Physical: Execucom, 108 Wild Basin Road, Two Wild Basin, Austin, TX 78764 I installed FaxIt yesterday and it works great with the Intel board. It is very easy to use and the printed output from a received fax looks much better than the output from Intel's Connect program. It prints about twice as fast as well. -- Dan Mutchler | ARPA/Internet: mutchler@EBay.Sun.COM Sun Federal System Engineer | UUCP: ...!sun!mutchler -------------------------------------------------------------------------- Flying back from Lubbock, I saw Jesus on the plane Or maybe it was Elvis, You know they kind of look the same. -- Don Henley