Path: utzoo!attcan!uunet!jarthur!usc!cs.utexas.edu!uwm.edu!csd4.csd.uwm.edu!info-high-audio-request From: chowkwan@aerospace.aero.org Newsgroups: rec.audio.high-end Subject: Power Line Conditioners Message-ID: <6538@uwm.edu> Date: 22 Sep 90 15:48:02 GMT Sender: news@uwm.edu Lines: 36 Approved: tjk@csd4.csd.uwm.edu Tom Pohorsky wanted thoughts on whether power amps should be plugged into line conditioners. Here's a thought (and it's just my thought, not intended as gospel). It depends on the conditioner. With a combination like the Tice Power Block/Titan, it becomes feasible to plug the amp into the conditioner. There is a guy on this net who uses them to power VTL Ichibans which are 200 watt monoblock all-triode pure class A amps. There, I always wanted to say that. I'm calling this person a "guy on this net" in case he desires anonymity. BTW this guy uses a dedicated Power Block/Titan combo for each monoblock. Personally, I have a more modest Tripplite and a more modest VTL 90/90. I plug the VTL directly into the outlet. Not so much to preserve the flow of power to the amp but because I find the amp's power draw interferes with the power to the CD player when they are both plugged into the Tripplite. The Sony C7ESD starts sounding harsh and digity when the amp draws down. Plugging the VTL DeLuxe pre-amp into the conditioner does not seem to adversely affect the CD. Now I have a question. Has anyone experimented with generating their own power? i.e. Honda sells these portable power generators. Has anyone tried using something like this (dedicated stereo pair naturally to avoid intermodulation distortion) and perhaps Cardas Hexlink power cords all the way from generator to amp? Admittedly this is probably going over the top but I can imagine some high-end dealer trying something like this to achieve the perfect presentation. After all, many of them spend thousands of dollars building expensive demonstration rooms. Relative to that, the cost of dedicated power no longer seems so outlandish. -- ray