Xref: utzoo comp.dcom.modems:6801 comp.unix.xenix.sco:287
Path: utzoo!attcan!uunet!zephyr.ens.tek.com!uw-beaver!mit-eddie!media-lab!snorkelwacker!apple!uokmax!d.cs.okstate.edu!drd!archer!artadi
From: artadi@archer.UUCP (Dante Artadi)
Newsgroups: comp.dcom.modems,comp.unix.xenix.sco
Subject: Dial-in USR 2400 modem answers only at 1200 baud
Keywords: Need advice in modem speed problem.
Message-ID: <32@archer.UUCP>
Date: 27 Sep 90 19:51:56 GMT
Reply-To: archer!artadi@drd.com (Dante Artadi)
Followup-To: comp.dcom.modems
Organization: Archer & Associates
Lines: 25




Hello netters!  I'm having a dial-in baud rate problem with my USR
Courier 2400 modem.  I can't connect to the modem at 2400, only at
1200 (from another modem).

Our Xenix SV 386 manuals suggest trying this command:
     cu -s2400 -l(our ttynn line) dir

When I press return, I get the following response:
     Connected
     Lost Carrier
     Disconnected

The manual says that this command, followed by other "AT"-type
commands, will allow me to configure the (dial in & out) modem to
accept calls at 2400.  But, as you can see, I am "disconnected" before
I can type in the other crucial commands.  

Please e-mail.  Your assistance will be trully appreciated.  Trying to
work at 1200 is too slow :-(   

-- 
Dante Artadi [archer!artadi@drd.com]  .  .  .  .  "Ritorna vincitor!"