Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!ames!sun-barr!cs.utexas.edu!uunet!jarthur!nntp-server.caltech.edu!ziggurat!tim
From: tim@ziggurat.gg.caltech.edu
Newsgroups: comp.periphs.scsi
Subject: Re: PC SCSI interface
Keywords: PC, SCSI, MSDOS
Message-ID: <tim.654651920@ziggurat>
Date: 29 Sep 90 23:45:20 GMT
References: <1990Sep20.175400.18626@maths.tcd.ie> <1990Sep26.181838.10272@clmqt.marquette.Mi.US> <190@thor.UUCP>
Sender: news@nntp-server.caltech.edu
Organization: California Institute of Technology, Pasadena
Lines: 13
Nntp-Posting-Host: ziggurat.gg.caltech.edu

In <190@thor.UUCP> scjones@thor.UUCP (Larry Jones) writes:
>> >What board would you advise for using a SCSI drive
>> >(a) on a PC/XT, (b) on an AT?
>> 
>> a: Seagate ST-01 or -02, depending on where the floppy controller is.
>You should either buy a Yugo...
>> b: DPT's SCSI Host adaptor or Adaptec's 154xB SCSI Host Adaptor.
>or else buy a Cadillac or a Lincoln.
>Why oh why aren't there any "midsize" SCSI host adapters?

What about Future Domain?

Tim