Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!sdd.hp.com!ucsd!ucbvax!VTVM1.CC.VT.EDU!RVGC2
From: RVGC2@VTVM1.CC.VT.EDU ("Ken Wieringo rvgc2@vtvm1.bitnet")
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: Installing a 3.5" driver in Leading Edge model-?? computer
Message-ID: <9010032105.aa16985@louie.udel.edu>
Date: 4 Oct 90 00:57:19 GMT
References: <pcip-request@UDEL.EDU>
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 7

you probably can install a half height 3.5" drive that is a 720m unit,
in place of the 360 5.25" unit. Inside the computer you should find a ribbon
 cable with two female connectors on it and one is A and one is B drive.
 Can't tell you for sure but most floppy driver cards support two drives.
 Just watch out for how much power the drives consume from the power supply.
 Leading Edge that old may not be a 286 machine and the p.s. is not very
 large( many watts)  Any hoo I believe it can be done.