Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!hplabs!hpcc05!hpujsda!kasahara
From: kasahara@hpujsda.HP.COM (Hiroyuki Kasahara)
Newsgroups: comp.sys.amiga
Subject: PAL screen with HD, help!
Message-ID: <1380001@hpujsda.HP.COM>
Date: 26 Sep 90 04:48:19 GMT
Organization: YHP/SDC/CPO - Tokyo, Japan
Lines: 20

I am using Amiga500 and SupraDrive 500XP now.  Before I got a hard
drive, I always used PalBooter to get a PAL screen.  But when I tried
it with hard drive,  SupraMount program caused an error and the drive
was not mounted.

Then I tried the other screen mode switcher, GoPAL and FastPAL.  But
these programs only change a sync-rate of the output signal, and the
vertical resolution of the WorkBench didn't change. (Bottom half inch
of the screen is always black)

So, someone please tell me the way to:

   1.  mount a hard drive with PalBooter.
   2.  change a vertical resolution of the WorkBench in PAL mode.
   3.  modify a hardware to change the screen mode by switch.

Any help is appreciated;  thanks.

Hiroyuki Kasahara (kasahara@hpujisa.yhp.hp.com)
---