Path: utzoo!attcan!uunet!van-bc!ubc-cs!alberta!herald.usask.ca!weyr!p0.f80.n140.z1.FIDONET.ORG!Cameron.Alexson
From: Cameron.Alexson@p0.f80.n140.z1.FIDONET.ORG (Cameron Alexson)
Newsgroups: comp.sys.amiga
Subject: Syquest A2091 problems
Message-ID: <861.2706DD72@weyr.FIDONET.ORG>
Date: 30 Sep 90 03:04:41 GMT
Sender: ufgate@weyr.FIDONET.ORG (newsout1.26)
Organization: FidoNet node 1:140/80.0 - Xerox Service I, Saskatoon Sask
Lines: 18


  I am having problems getting the A2091 to allow me to read and write 
to my Syquest 555 after both low and high level formatting have 
appeared to have been successful.  Any writes to the disk bring R/W 
error system box to the screen and lock up the system when Cancel is 
pressed repeatedly.   Any help with this would be appreciated.
    I have used the A2091 setup software to do the low level formatting 
and there are no bad blocks on the cartridge.  
                                   Searching for Answers,
                                           Cam.



--  
Cameron Alexson - via FidoNet node 1:140/22
UUCP: ...!alberta!herald!weyr!80.0!Cameron.Alexson
Domain: Cameron.Alexson@p0.f80.n140.z1.FIDONET.ORG
Standard Disclaimers Apply...