Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!wuarchive!cs.utexas.edu!sdd.hp.com!mips!swrinde!ucsd!nosc!crash!pro-graphics.cts.com!danb20
From: danb20@pro-graphics.cts.com (Dan Bachmann)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Floppy interface
Message-ID: <4732@crash.cts.com>
Date: 30 Sep 90 06:56:27 GMT
Sender: root@crash.cts.com
Lines: 14

In-Reply-To: message from maniac@cleanhead.cs.unlv.edu

        No, not all IBM 3.5" drives will work. The stock A500 uses a Chinon
drive. Mine was replace with a Panasonic no problem. I hear the Toshiba drives
have been made to work and a simple circuit will allow you to use most any
3.5" drive.
        I don't have FTP, but I can mail you the file if you send me a blank
and re-state that you wanted the schemes for a drive.  address in .sig below.

 ProLine: danb20@pro-graphics           ***************************
    UUCP: ...crash!pro-graphics!danb20  *       Dan Bachmann      *
ARPA/DDN: pro-graphics!danb20@nosc.mil  *  Raritan Valley College *
Internet: danb20@pro-graphics.cts.com   ***************************
U.S.Mail: 509 StonyBrook Drive, Bridgewater, NJ 08807