Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!decwrl!ucbvax!bloom-beacon!eru!hagbard!sunic!mcsun!tuvie!mike
From: mike@tuvie (Inst.f.Techn.Informatik)
Newsgroups: comp.sys.apollo
Subject: Re: Problem with bash from an xterm on Apollo
Message-ID: <1899@tuvie>
Date: 4 Oct 90 10:11:22 GMT
References: <27375@usc.edu>
Reply-To: mike@tuvie.UUCP (Inst.f.Techn.Informatik)
Organization: Technical University of Vienna, AUSTRIA
Lines: 19

In article <27375@usc.edu> sridhar@surya.usc.edu (M. A. Sridhar) writes:
>
>I run X11R3 on an Apollo DN3000 with Domin/IX 10.2, and I use xterm to log into
>a DECstation on the local net. And I built GNU's bash to run on the DECstation.
>The problem is that when I run bash, and execute say ls -FC under it, about half
>the output does not show up!
Seems like there are some problems with xterm. When usingan xterm and rlogin to
a MicroVax II running Ultrix-32 V3.1 (Rev. 9) System #4, vi has problems 
updating the screen if I insert lines. CTRL-L works OK, still I am once 
again having doubts about Apollo software being compatible to _anything_. 

					bye,
						mike
Michael K. Gschwind, Institute for VLSI-Design, Technical University, Vienna
mike@vlsivie.at                 1-2-3-4 kick the lawsuits out the door
mike@vlsivie.uucp               5-6-7-8 innovate don't litigate
e182202@awituw01.bitnet         9-A-B-C interfaces should be free
Voice: (++43).1.58801 8144      D-E-F-O look and feel has got to go!
Fax:   (++43).1.569697