Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!know!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!ohstpy!miavx1!cetatman
From: cetatman@miavx1.acs.muohio.edu
Newsgroups: comp.sys.apple2
Subject: Connecting Non-Apple Printer To IIc
Message-ID: <2486.270a73d6@miavx1.acs.muohio.edu>
Date: 4 Oct 90 04:27:18 GMT
Lines: 13

I have a friend that has an Apple IIc, but does not have a printer.  I have
an old Radio Shack DMP-120 dot matrix printer that I am willing to loan him
if we can get it connected (he realizes that it will only do text and not
graphics).  THe printer has both a parallel and a serial port.  However, the
serial port on the IIc is a five pin port and the one on the printer is only
4 pin.  I am pretty sure I could make a cable if I had the port assignments
for the IIc and a connector.  Does anyone have the port assignments (they are
not in the manual) and/or know where to get a connector for it.

If you can help, please E-mail me since I usually do not read this newsgroup.

Thanks
Curt Tatman